Atlantis Land I-Storm A02-RA(Atmos)_ME01 User Manual Page 97
- Page / 112
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
mymachine> ip route add default 0.0.0.0 192.168.2.3 0:0:0:0
mymachine> ip route add testnet1 192.168.101.0 192.168.2.34
mymachine> ip route add testnet2 192.168.102.0 192.168.2.34 ff:ff:ff:0 1 60
mymachine> ip route
route add testnet2 192.168.102.0 192.168.2.34 ff:ff:ff:00 1 # MAN 58s/1m via
ether *
route add testnet1 192.168.101.0 192.168.2.34 ff:ff:ff:00 1 # MAN via
ether
route add default 0.0.0.0 192.168.2.3 00:00:00:00 1 # MAN via
ether
10.45 routeflush
10.45.1Syntax
routeflush [<i/f>] [all]
10.45.2Description
Removes routes from the route table. If an interface (<i/f>) is specified, only routes
through the named interface are removed. If all is not specified, only host routes
(those with a mask of ff:ff:ff:ff) are removed.
The routeflush command is hidden, not shown by ip help.
Configuration saving saves this information.
10.45.3Example
mymachine> ip routeflush ether all
mymachine> ip routeflush
10.46 routes
10.46.1Syntax
routes
10.46.2Description
Lists routes. (The same as route, with no parameters.)
10.46.3Example
mymachine> ip routes
route add testnet1 192.168.101.0 192.168.2.34 ff:ff:ff:00 1 # MAN via
ether
route add default 0.0.0.0 192.168.2.3 00:00:00:00 1 # MAN via
ether
10.47 snmp
- (v1.01) 1
- Contents 2
- 7. NAT Console commands 91 4
- 8. PPP Console commands 4
- 9. PPTP Console commands 5
- 10. TCP/IP Console commands 5
- 1. About this Guide 8
- 2.1 General notes 10
- 2.2 event … 10
- 2.3 restart 10
- 2.4 uptime 10
- 2.5 version 11
- 2.7 . (history mechanism) 12
- 2.8 @ commands 13
- 2.9 Special-purpose commands 13
- 2.10 list 14
- 2.11 echo … 14
- 2.12 tell <process> … 14
- 2.13 exit, exit! 15
- 2.14 debug 15
- 2.15 crlf, nocrlf 15
- 2.18 cpu 16
- 2.19 debug 16
- 2.20 exit 16
- 2.21 help 17
- 2.22 info 17
- 2.23 mem 17
- 2.24 rb, rh, rw, wb, wh, ww 17
- 2.25 steal 18
- 2.26 tell 18
- 3. Bridge Console commands 20
- 3.2 device delete 21
- 3.3 device list 21
- 3.4 ethertype 22
- 3.5 filter 22
- 3.6 filterage 23
- 3.7 flush 23
- 3.8 info 23
- 3.9 interface 24
- 3.10 portfilter 24
- 3.11 spanning 25
- 3.12 status 25
- 3.13 version 25
- 4. BUN Console commands 27
- 4.2 help 29
- 4.3 version 29
- 4.4 build 29
- 4.5 config 30
- 4.6 list config 30
- 4.7 list devices 31
- 4.8 show device 31
- 4.9 list classes 32
- 4.10 show class 32
- 4.11 list ports 32
- 4.12 show port 33
- 4.13 set port 33
- 4.14 list channels 33
- 4.15 list all open channels 34
- 4.16 show channel 34
- 4.17 set channel 34
- 4.18 reset port 35
- 5.1 config 36
- 5.2 help 36
- 5.3 pool 37
- 5.4 status 37
- 5.5 trace 38
- 5.7 ip device 38
- 6. DHCP-server Console 40
- 6.1 config 41
- 6.2 help 42
- 6.3 pool 42
- 6.4 reset 42
- 6.5 status 43
- 6.6 trace 44
- 6.7 version 44
- 7. NAT Console commands 45
- 7.1.1 Syntax 46
- 7.2 help 47
- 7.3 interfaces 47
- 7.4 inbound 48
- 7.5 info 49
- 7.6 protocol 49
- 7.7 sessions 50
- 7.8 stats 50
- 7.10 dump 51
- 7.11 fragments 51
- 7.9 version 51
- 8.1 Console object types 53
- 8.2 Console examples 53
- 8.3 <channel> clear 55
- 8.4 <channel> disable 55
- 8.5 <channel> discard 55
- 8.6 <channel> echo 56
- 8.8 <channel> enable 57
- 8.9 <channel> event 57
- 8.10 <channel> hdlc 57
- 8.11 <channel> info 58
- 8.16 <channel> llc 59
- 8.17 <channel> pvc 60
- 8.18 <channel> qos 61
- 8.20 <channel> svc 61
- 8.23 <channel> welogin 63
- 8.24 bcp 63
- 9.1 Console object types 66
- 9.2 bind 67
- 9.3 <tunnel> connect 67
- 9.4 <tunnel> create 68
- 9.5 <tunnel> delete 68
- 9.7 <tunnel> event 69
- 9.8 <tunnel> info 69
- 9.9 list 69
- 10.TCP/IP Console 70
- 10.2 abort 72
- 10.3 arp 73
- 10.4 arprouting 74
- 10.5 autoloop 74
- 10.6 config 75
- 10.7 device 76
- 10.8 disable 78
- 10.9 enable 79
- 10.10 errors 79
- 10.11 etherfiles 79
- 10.12 files 80
- 10.13 flush 81
- 10.14 get 81
- 10.15 help 81
- 10.16 ipatm abort 82
- 10.17 ipatm arp 82
- 10.18 ipatm arpserver 82
- 10.19 ipatm files 83
- 10.20 ipatm help 84
- 10.21 ipatm lifetime 84
- 10.22 ipatm pvc 85
- 10.23 iphostname 86
- 10.24 nat 86
- 10.25 noerrors 87
- 10.26 norelay 87
- 10.27 ping 87
- 10.28 portname 88
- 10.29 protocols 89
- 10.30 relay 90
- 10.31 restart 90
- 10.32 rip accept 91
- 10.33 rip allowed 91
- 10.34 rip boot 92
- 10.35 rip help 92
- 10.36 rip hostroutes 93
- 10.37 rip killrelay 93
- 10.38 rip poison 93
- 10.39 rip relay 94
- 10.40 rip relays 94
- 10.41 rip rxstatus 94
- 10.42 rip send 94
- 10.43 rip trigger 95
- 10.44 route 95
- 10.45 routeflush 97
- 10.46 routes 97
- 10.47 snmp 97
- 10.48 stats 98
- 10.49 subnet 99
- 10.50 trace 100
- 10.51 untrace 100
- 10.54 ? 101
- 10.52 uptime 101
- 10.53 version 101
- 10.54.2Description 102
- 11.TFTP Console commands 103
- 11.3 help 104
- 11.4 init 104
- 11.5 list 104
- 11.6 put 104
- 11.7 trace 105
- 11.8 version 105
- Symbols 106
- Warning symbol 3 112
© 2020, manymanuals.com. All rights reserved. | 1.639 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals